12V 5A Oil Pump Extractor 12v 60w Oil Extractor Pump Suit for Diesel Heating Oil

Description

Home
12V 5A Oil Pump Extractor 12v 60w Oil Extractor Pump Suit for Diesel Heating Oil
Description
Description
The oil-ectractor is a vane pump with brass lamellas.It is driven by a 12V-D.C.-motor via a reduction gear.As power supply please use a 12V-vehicle battery.The connections on the pump are built for hoses of 10mm internal diameter.
The external diameter of the suction-probe is 6mm.Therefore the pump can only be used for oil change if the inner diameter of the dipstick tube is bigger than 6mm.The oil-extractor is suitable to pump engine,diesel and heating oil.
Specifications
Motor:12V D.C
Power Draw: Approx. 5A
Sound Pressure Level:70 dB(A).
Vibration:<2,5m/s2
Max.Flow Rate:
Diesel:Approx. 1.1 gal./min.
Motor Oil(100°-125°F):Approx. 0.8gal/min.
Operation
1.Before starting to change motor oil drive the motor until the oil has a temperature of approx. 40°-50°C,104°-125°F.Less temperature will reduce the flow rate due to the high viscosity of the oil.If the oil is too hot the sealings of the pump might be disturbed.
2.Shut down the engine after having reached sufficient temperature.
3.Push the hose with the suction probe onto the pump socket and push the drain hose onto the drain socket,fasten both by using hose-clamps in or under to aviod the hoses coming loose due to the oil pressure.
4.Unwind the suction probe and straighten it properly before inserting through the dipstick-rube into the engine.Otherwise the pump will draw no or not enough oil.
5.Insert the suction-probe into the oil dipstick-tube and push it gently down to the lowest position of the oil pan.
6.Please use suitbale container to collect the old oil and lead the drain hose into this container.
7.Connect the oil-extractor to the 12V car battery.Make sure that the clamps are connected with the correct poles of the battery(red clamps to "plus",black clampto "minus")
8.Swithc the pump on and pump tje oil out of the engine.
9.As soons as no further oil is pumped,switch off the pump.Do not let the pump run without oil.
10.Fill the engine with fresh motor oil according to the maintenance instruction for your car and check the oil level with the oil dipstick.
11.After finishing your work clean the pump thoroughly by pumping some fresh oil.
12.Remove the hoses fom the pump,plug them together and store the whole unit in a place where it is protected against dust.
ATTENTION
Never let old or fresh oil seep into the ground or into the sewage system.You will harm the environment and you will make yourself liable for prosecution.Collect the old oil and dispose at your local collecting station,petrol station or oil dealer.
IMPORTANT NOTICE
The working period for this oil extractor should not exceed 30 minutes.After this period please switch off the pump and let it cool down.
Warning
The oil-extractor is the ideal equipment for quick and clean oil changes.The oil extractor works by connecting the clamps to the 12V car battery.The oil is simply drawn out he motor through the oil dipstick bore.Please use the extractor exclusively for motor,diesel or heating oil.
The extractor is not suitable for extracting:
Water(no lubrication of the pump)
Gearbox oil(too viscous)
Easy inflammable liquilds(fuel,petrol,etc.)
Policy
1.Payment
● We accept Payment via PayPal only.
VAT and TAX is not included, please note.
2.Delivery details
● Will ship order within 1 working days after get your payment.
● Shipping to US,AU,UK and CA takes about 7-15 working days for delivery normally.
3.Return
●Please note that we only accept returns within 30 days after delivery.
4.About us
● We will make every effort to make your shopping the most pleasant and wonderful! Any question feel free to contact us!
On Aug-06-21 at 11:06:08 PDT, seller added the following information: