-40%
64-67 Chevelle A-Body 9 INCH REAR END KIT OPEN DIFF COMPLETE WITH DISC BRAKES
$ 2112
- Description
- Size Guide
Description
General Motors 1964 - 1967 A Body New Flanged Housing 60.5" Stock pinion Location with Big Ford Housing EndsWheel mounting flange to wheel mounting flange will be 60.5" with axles installed
1964-1967 Chevelle, Cutlass, Regal, Lemans, GTO, ect. 60.5" track width with brakes installed.
CHOOSE:
GEAR RATIO
REAR END YOKE SIZE AND
BOLT PATTERN
FILL AND DRAIN PLUGS (NONE OR 3/4 NPT IF REQUESTED WHEN YOU ORDER
)
**********( WE CAN NOT BUILD UNTIL THE ABOVE OPTIONS ARE CHOSEN!!!)************
Ford 9 Inch for
A Body New Flanged Housing 60.5" Stock pinion Location with Big Ford New Style Housing Ends. 64-67 GM Midsize Cars.
Wheel mounting flange to wheel mounting flange will be 60.5" with axles installed (2 1/2" offset axles)
Stock rear end pinion yoke location between wheel flanges when center section is installed.
Standard driveshaft location to the right exactly like a General Motors rear.
New Stamped Housing with new 3" x .188" wall DOM tubing.
Big Ford New Style (torino) housing ends with .375" (3/8") bolt holes
new studs installed in housing
Nodular Iron OPEN DIFFERENTIAL Center Section 9" Ford with 31 spline US Gear ring & pinion
, Assembled.
FREE Shipping! The Center Section will be Assembled and set up for Street by Professionals.
Nodular Iron Gear case and Nodular iron Stock size Pinion Support.
9 inch Ford US GEAR 8620 Street Series Ring & Pinion
(ratios 325, , , , 389, 4.11 or 4.30)
.
2.89" OD Bearing size x 1.78
" ID bearing surface. nodular iron 5 bolt pinion support
.
CHOOSE Rear End Yoke: choose 1310 series (3 7/32" wide with 1 1/16" cap OD) or 1330 series 3 5/8" wide with 1 1/8" cap OD) rear end yoke.
Open Differential is like a stock OEM rear end and will sometimes only spin one tire on accelleration.
All new unit except the open diff ring gear carrier (it will be reconditioned with new internal gears).
Package includes: PEM nodular iron case, iron pinion support, pinion bearings & races, pinion bolts, pinion depth shims,
pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.
All bearings and seals are Premium Brands ( either Timken or Koyo).
Also comes with big housing gasket and u-bolts for yoke.
We will build this center section after you verify the ratio of ring & pinion and the yoke series you want.
PEM Econo Rear Disc Brake Kit with Emergency Brake Calipers for 9" Ford
This 9 inc Ford Disc Brake Kit kit includes bolt-on caliper brackets
11-1/4" vented rotors with
5 on 4-1/2" and 5 on 4-3/4" bolt circles
Rotor is 11.25" OD x .960" wide
Rotor had hub register of 2.78" OD
Rotor has 6.25" Inside D
iameter
Rotor offset of 2.25"
Bolt patterns have 1/2" stud holes to accommodate 1/2" studs
The brackets fit the
Large Old Style Ford and the New Style Large Torino
Housing Ends sho
wn in picture # 11 above.
'78-'88 GM emergency brake calipers, brake pads and hardware.
Minimum 15" diameter wheels.
Caliper piston size is 2.375" OD.
WARNING: Cancer
And Reproductive Harm-
www.P65Warnings.ca.gov