Heat Shrink End Caps with Valves - 1" to 5" - Electriduct

Description

Electriduct eBay Store
FREE Shipping on All Items
Expedited Shipping Available
TOLL FREE Customer Service
Heat Shrink End Caps with Valves - Electriduct
Specifically used with Heat Shrink Tubing at the end of Wires and Cables.
These Heat Shrink End Caps provide an easy and efficient way of sealing, insulating and shielding cable or wire ends.
The ideal heat shrink temperature for the end caps is around 275F (135C). Applying the heat shrink end cap can be simple and hassle-free. Its always good to make sure the cable or wire is clean and free of debris before you place the heat shrink end cap over the exposed end.
When it comes to durability these end caps rank very high in quality. When looking for that extra protection against damage and moisture, Heat Shrink Cable End Caps is the ideal solution.
Heat shrink end caps with release valves are used for sealing high voltage and pressurized cables and to release expanding gases created inside cables due to storage, transportation and climate changes.
The End Cap is adhesive lined to bond with the heat shrink it overlaps
Hot melt adhesive seals and insulates in one step to speed installation
Adhesive lining will prevent moisture penetration, allowing for long term storage of cable
Forms pressure-tight seal on ends of communication and power cables
Shrink ratio of 3:1 insulates a wide range of diameters and irregular shapes
Cross-linked UV resistant material improves chemical and temperature resistance
3 to 1 shrink ratio, so only 6 sizes are needed to cover a range of 0.16" to 5"
Continuous use temperature of up to 110 °C
Shrink temperature of 120-135 °C
Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
Capable of sealing the entire surface of a cable or wire
Nominal Size
(inches)
ID (before shrinking)
(inches)
ID (after shrinking)
(inches)
Wall (after shrinking)
(inches)
Length (before shrinking)
(inches)
1
1
0.31
0.09
2.76
1-1/2
1.56
0.59
0.12
3.35
2
2.17
1
0.13
4.33
3
2.95
1.38
0.14
5.12
4
3.94
1.97
0.16
6.1
5
4.72
2.36
0.16
6.1
Attention
: Sizes are approximate, and will vary by a few percent.
Shipping
All our products include FREE Standard Shipping. If you need your order to be Expedited, please contact us to see the available options.
We ship most of our orders within 1 business day and tracking is provided as soon as it ships.
Small and light items usually ship via USPS First Class or Priority Mail.
Medium and large packages typically ship via FedEx or UPS, and no PO Box address will be accepted for them.
Returns
Your satisfaction is of utmost importance to us and we support the 14 day return policy guidelines (you pay for return shipping).
You must contact us beforehand to set up return and obtain your RMA#.
Keep in mind that items need to be returned in the same resalable condition in which they were sent for a product refund to be applied, including original packaging. Note that your order may be subjected to a restocking fee to cover shipping and handling costs.
Orders that shipped with Free Shipping actually do have a shipping cost and is not actually free. Those shipping costs are deducted from the credit amount of the return.
About Us
Electriduct is a wire management and cable protection company based in Fort Lauderdale, Florida. We supply products to those who are concerned about protecting their electronic equipment and also worried about the costs of workplace safety.
This is achieved by offering high quality and reasonably priced solutions such as cord covers, cable raceway, wire loom, power distribution, braided sleeving, and much more.
Hours of Operation (M-F) 9AM-5PM EST.
We strive to complete all of our eBay transactions to the buyer's utmost satisfaction.
If you have any questions, comments, or issues please contact us immediately so we can assist you.